CTE-1101-10

CTE-1101-10

Tstat: Fan Box, Single, DA, Horiz F


NOTE: The CTE-5202 replaces the CTE-100x/110x series.
The KMC CTE-1101 direct-acting electronic thermostats are designed for use with CEE/CEP/CSE/CSP-4000 series controller-actuators to control damper actuators and/or valves in HVAC systems. The capability to adjust minimum and maximum limits is at the thermostat rather than at the controller. These single setpoint DA thermostats are for cooling applications.
An additional output is provided for control of optional KMC REE-4000 series relay modules. This 0–6 VDC output (T3) is not restricted by the minimum and maximum control points. Compared to the CTE-1001s, CTE-1101s have a different relationship between T1 and T3 that allows them to operate a REE-4002 fan box relay from T3 below setpoint while T1 operates the VAV box above setpoint. The CTE-1101 also has (not found on CTE-1001/1002s)a temperature output (A) that allows temperature averaging with remote temperature transmitters, such as the TTE-1001.
Cover construction allows the setpoint indicator and thermometer to be either visible or concealed. Optional accessories include an insert for concealing the window, and stops to lock/restrict the setpoint adjustment. Vertical and horizontal mounting methods are available.
KMC CTE-1101 Room Thermostats are intended for use with the CEE/CEP/CSE/CSP-4000 series controller/actuators.
An optional XEE-4002 9.1 VDC power supply module can power the CTE-1101 thermostat. Then the CTE-1101 can be used (without the controller-actuator) to control a damper or valve operated by an MEP series actuator or to control other devices via optional REE-4000 series relays.
The discontinued CEE-1100 series of electronic thermostat controllers are similar to the corresponding model of CTE-1100 thermostats except the CEE-1100 Series requires the use of a TTE series "remote" temperature sensor.