CTE-1001-10 | Tstat: Single, DA, Horiz F
OVERVIEW | Tstat: Single, DA, Horiz F
NOTE: The CTE-5202 replaces the CTE-100x/110x series.
The KMC CTE-1001/1002 electronic thermostats are designed for use with specific CEP/CSP-4000 series controller-actuators for controlling damper actuators and/or valves in HVAC systems. The ability to adjust minimum and maximum limits is at the thermostat rather than at the controller. They are single setpoint units for cooling and heating applications. Available model options include DA heating or RA cooling, vertical or horizontal mounting, and °F or °C scale.
An additional output is provided for control of optional KMC REE-4000 series relay modules. This 0–6 VDC output (T3) is not restricted by the minimum and maximum control points.
Cover construction allows for the setpoint indicator and thermometer to be either visible or concealed. Optional accessories include a blanking insert for concealing the window, and stops to lock/restrict the setpoint adjustment.
CTE-1001/1002 room thermostats are intended for use with CEE/CEP/CSE/CSP-4000 Series controller/actuators.
An optional XEE-4002 9.1 VDC power supply module can power the CTE-1001/1002 thermostat. Then the CTE-1001/1002 can be used (without the controller-actuator) to control a damper or valve operated by an MEP series actuator or to control other devices via optional REE-4000 series relays.
For similar thermostats with temperature averaging capability and a different relationship between T1 and T3, see the CTE-1101.
APPLICATION GUIDE, CTE-5202 (Updated: 2020-08-28) [Rev. J]APPLICATION GUIDE, Room Sensor and Thermostat Mounting and Maintenance (Updated: 2021-02-22) [Rev. F]
- Data Sheets
- Installation Guides
- Product Cross-References
- Selection Guides
- White Papers