CTE-1103-11 | Tstat: Fan Box, Dual, DA/RA, Horiz C
OVERVIEW | Tstat: Fan Box, Dual, DA/RA, Horiz C
NOTE: The CTE-5202 replaces the CTE-100x/110x series.
The KMC CTE-1103 electronic thermostat is designed for use with specific CEE/CEP/CSE/CSP-4000 series controller-actuators to control damper actuators and/or valves in HVAC systems. The ability to adjust minimum and maximum limits is at the thermostat rather than the controller. This is a dual setpoint thermostat for heating/cooling applications. Several mounting methods are available.
Additional outputs are provided for control of optional KMC REE-4000 series relay modules. The 0–6 VDC output (T3/T4) are not restricted by the minimum and maximum control points.
Cover construction allows for the setpoint indicator and thermometer to be either visible or concealed. Optional accessories include an insert for concealing the window and stops to lock/restrict the setpoint adjustments.
A temperature output (A) allows temperature averaging with remote temperature transmitters, such as the TTE-1001.
An optional XEE-4002 9.1 VDC power supply module can power the thermostat. Then the thermostat can be used (without the controller-actuator) to control a damper or valve operated by an MEP series actuator or to control other devices via optional REE-4000 series relays.
The discontinued CEE-1100 series of electronic thermostat controllers are similar to the corresponding model of CTE-1100 thermostats except the CEE Series requires the use of a TTE “remote” temperature sensor.
APPLICATION GUIDE, CTE-5202 (Updated: 2020-08-28) [Rev. J]APPLICATION GUIDE, Room Sensor and Thermostat Mounting and Maintenance (Updated: 2021-02-22) [Rev. F]CEP-4000 Series VAV Flow Controller-Actuators Application Guide (Updated: 2019-05-14)
- Data Sheets
- Installation Guides
- Product Cross-References
- Selection Guides
- White Papers