STE-1402 | Sensor: Duct Temperature, 10K Type III, 8-Inch Probe with Enclosure
OVERVIEW | Sensor: Duct Temp, 10K-T3, 8" Probe
The KMC STE-1400 Series, Type III, 10,000 ohm thermistor temperature sensors are available in different housings for surface, duct, duct averaging, immersion, strap-on, and outside air applications. All probes are constructed to provide good heat transfer and fast response.
Each STE-1402 duct sensor is encapsulated in a 1/4-inch O.D. stainless-steel probe. The probe can be inserted directly into the duct for single-point monitoring, and an enclosure with wire leads is included.
- Application Guides
STE-1400 Series Temperature Sensors Data Sheet (Updated: 2020-04-30) [Rev. R]Older STE-1400 Series Temperature Sensors Data Sheet (Before May 2020) (Updated: 2017-10-24) [Rev. Q]
STE-1401/02/04/05 Rigid Duct Temp Sensor Installation Guide (Updated: 2020-04-30) [Rev. F]Older STE-1401/02/04/05 Rigid Duct Sensor Installation Guide (Before May 2020) (Updated: 2014-02-06) [Rev. E]
- Selection Guides
WHITE PAPER, Sensor and Thermostat Selection Fundamentals (Updated: 2022-04-04) [Rev. B]WHITE PAPER, VAV Zoning Made Easy [Rev. B]