STE-1424 | Sensor: Immersion (or Duct), Temperature, 10K-Type III, 6″ Probe
OVERVIEW | Sensor: Duct/Immersion, 10K-T3, 6”
The KMC STE-1400 Series, Type III, 10,000 ohm thermistor temperature sensors are available in different housings for surface, duct, duct averaging, immersion, strap-on, and outside air applications.
The STE-1424 immersion sensor is encapsulated in a 6-inch long, 1/4-inch O.D., 304 stainless-steel probe. The probe protrudes from the bottom of the sensor housing, minimizing lead length error. The probe inserts into an HMO-4546 stainless-steel thermowell.
For optimal sensing, use HMO-4532 thermal compound in the thermowell for optimal heat transfer from the thermowell to the probe.
For a 4-inch immersion sensor, see the STE-1423.
The STE-1424 immersion sensor replaces the older STE-1422 used with a (threaded) HMO-4544 thermowell. When replacing an STE-1422 sensor with an STE-1424, also replace the thermowell with an HMO-4546.
The STE-1424 may also be used as a duct sensor (without a thermowell).
- Application Guides
STE-1400 Series Temperature Sensors Data Sheet (Updated: 2020-04-30) [Rev. R]Older STE-1400 Series Temperature Sensors Data Sheet (Before May 2020) (Updated: 2017-10-24) [Rev. Q]
INSTALLATION GUIDE, STE-1423/1424 Immersion (or Duct) Temperature Sensor (Updated: 2020-04-30) [Rev. A]